Ürünler

ARRI D 21

 ARRIFLEX D-21

Camera Type 35 format digital film style camera with an optical viewfinder
HD-SDI Connections 2x dual link HD-SDI out
Frame Rate HD Mode HD422 (16:9): 1-60 fps

HD Mode HD444 (16:9): 1-30 fps

Mscope™ HD422 (4:3): 1-25 fps

Data Mode ARRIRAW (16:9): 1-30 fps

Data Mode ARRIRAW (4:3): 1-25 fps

Frame rates other than the standard HD video frame rates of 23.976 PsF, 24 PsF, 25 PsF, 29.97 PsF, 30 PsF, 48 PsF, 50 PsF, 59.94 PsF and 60 PsF can be achieved with a recorder that can interpret the Variframe Flag.

All frame rates are crystal controlled and can be set with 0.001 fps precision. Exposure compensated speed ramps are supported by the electronic-mirror shutter.

Aperture 23.760 x 13.365 mm/0.9354″ x 0.5262″ in HD Mode

23.760 x 17.820 mm/0.9354″ x 0.7016″ max. in Data Mode & Mscope™

Signal Output HD Mode – HD-DSI (SMPTE 292M):
1920 x 1080 4:2:2 YCbCr 10 bit @ 23.976, 24, 25, 29.97, 30 PsFHM Mode – dual link HD-SDI (SMPTE 372M):
1920 x 1080 4:4:4 RGB 10 bit @ 23.976, 24,25, 29.97, 30 PsF
1920 x 1080 4:2:2 YCbCr 10 bit- 1920 x 1080 4:4:4 RGB 10 bit @ 23.976, 24,25, 29.97, 30 PsF @ 48, 50, 59.94, 60 PsF

Mscope™ – dual link HD-SDI (SMPTE 372M):
1920 x 1080 4:2:2 YCbCr 10 bit @ 23.976, 24, 25 PsF

Data Mode – ARRIRAW T-Link
(ARRIRAW transmission protocol mapped into RGBA dual link HD-SDI stream according to SMPTE 372M):
2880 x 2160 RAW 12 bit Bayer data @ 23.976p, 24p, 25p
2880 x 1620 RAW 12 bit Bayer data @ 29.97p, 30p

Weight (without lens) Body only: 8.6 kg/19.0 lbs

Body and viewfinder: 10.9 kg/24.0 lbs

Lens Mount 54 mm PL, centered for Super 35, with Lens Data System (LDS) contacts
Flange focal depth 52mm nominal
Display Camera display on left side with individual buttons for:
Camera RUN, PHASE (electronic inching & mirror rotation).
NORM-PS/CCU control, LOCK, MODE, SEL, and SET.
Video menu over composite video output for control of operational parameters:
Output mode, standard frame rates, white balance and color matrix, signal output range, contrast characteristic and sensitivity.
Shutter Spinning, electronically adjustable reflex mirror shutter.
Adjustable to 11.2°, 22.5°, 30°, 45°, 60°, 75°, 90°, 105°, 120°, 135°, 144°, 150° 172.8° and 180°.
Viewfinder Optical reflex viewfinder with interchangeable ground glass.
Spherical or universal (adjustable to spherical or anamorphic) viewfinders available. Viewfinders are adjustable in two axes with automatic or manual image compression, laterally extendable for left eye operation and show illuminated frame lines (ARRIGLOW, adjustable in brightness).
Optional medium or long finder extender including magnifier. Optional heated eyecup.
Video Assist SD monitoring (PAL/NTSC video downscaled from captured image) with composite video or S-Video outputs.
Recording HD recording devices supporting HD-SDI (SMPTE 292M) or dual link HD-SDI (SMPTE 372M) signals for HD Mode operation.
Optional on-board HD recording using solid state memory recorder Flash Mag.
Common Connections 2x composite video out (CVBS)
1x S-Video out (Y/C)
1x power in (BAT)
1x 12 V accessory power out (Fisher 11-pin)
1x 24 V accessory power out (RS)
1x lens data display (LD)
2x lens control system bus (LCS)
1x accessory interface (AC)
1x camera control unit (CCU), 1 each focus, iris, zoom for lens monitors
Power 24V DC (acceptable voltage range: 20.5 to 36 V DC)
Power Consumption 2.1 A @ 24 fps, 1.9 A in Standby
Sound less than 20 dB(A) @ 24 fps
Dimensions Length: 39 cm/15.35″
Width (viewfinder left): 27 cm/10.83″
Height with handle: 30 cm/11.81″
Height without handle: 23 cm/9.06″
Accessories Accepts the whole range of ARRI matte boxes (15 or 19mm rods), follow focus and ARRI electronic accessories, Lens Data System (LDS). Wireless Remote System (WRS), Wireless Remote Control WRC-2, Iris Control Unit for speed/iris ramps (ICU-1), Remote On/Off switch (RS-4), External Synchronization Unit (ESU-1).

Specficially for ARRIFLEX D-21/D-21 HD: Low mode support set for Steadycam operation or underslung use and top-mounting of accessories without bridge plate, Flash Mag Mounting Adapter (FMA-1), Fibre Unit and Fibre Remote for an optical link to the recorder.

Misc Extra attachment points for rigging.