Ürünler
EKİPMANLAR
FİLTRELER
PHANTOM FLEX 2K
| Sensor Size: | 25.6 x 16mm |
| Resolution: | 2560×1440, 1080 |
| Frame Rate: | 1-1617 @ 2560×1440 1-2564 @ 1080 |
| Base ISO: | 1250 |
| Latitude: | 10 Stops |
| Bit Rate / Format / Time | 12 Bit RAW 32GB – 4.5sec @ 2500fps 512GB 1.25min @ 2500fps |
| Record Times | 32GB @ 2,500 fps = 4.5 seconds |
| 512GB @ 2,500 fps = 1:15 minutes | |
| Weight | 12 lbs |
Even with the excellent light sensitivity provided by the Phantom Flex 2K, shooting at high-speed frame rates requires a significant amount of light to properly expose a capture. The following diagram is a good rule of thumb to compensate your ISO at select frame rates that the Flex is capable of recording.
| Frames Per Second | ISO |
| 25 | 800 |
| 50 | 400 |
| 100 | 200 |
| 200 | 100 |
| 250 | 75 |
| 500 | 40 |
| 1000 | 20 |
| 1500 | 15 |
| 2000 | 10 |
| 2500 | 7 |
Key Features
- Up to 2,570 fps at 1920×1080 in Standard Mode
- 12-bit pixel depth
- 1200 ISO (measured using ISO 12232 SAT method)
- HQ Mode provides ultimate in image stability under changing shooting conditions
- Phantom CineMag compatible, CineMag interface has field-replaceable pin array
- 2 x 4:2:2 HD-SDI video ports, can be configured as dual-link 4:4:4 video (4:4:4 not available at 60fps video formats)
- Global, electronic shutter to 1 μs (shutter angles in HQ mode dependent upon frame rate and resolution)
- Multi-cine capable via segmented memory
- Internal mechanical shutter for hands-free and remote Current Session References
- On-camera controls for camera modes, settings, playback, edit & save
- Frame synchronization to external signal, allows multiple cameras to be synchronized – essential for stereo 3D recording
- Three 12VDC, 1.5A auxiliary power outputs for powering external devices (one is on the Viewfinder port), 4A maximum load
- External trigger signal on camera connector panel and both 12VDC power ports
- Genlock for synchronizing video playback – essential for 3D video workflows